Jump to content


Photo

Cylindrical Shells


  • Please log in to reply
1569 replies to this topic

#391 Phoenix

Phoenix

    UKR Forum Ex Regular!

  • General Public Members
  • PipPipPip
  • 544 posts

Posted 08 May 2005 - 06:11 PM

I fired a 70mm hummer and white star shell last night, which I'm pleased to report actually worked pretty much flawlessly - it burst at just the right height and everything lit, and went out before it landed, and considering the size and burst charge (BP on puffed rice) the break was fine. It wasn't hugely spectacular, but there wasn't anything technically wrong with it (my shells usually burst half a second too early or late, or drop a few sparks on the ground, but this one didn't).

Unfortunately, my Dad didn't quite manage to photograph it. Sorry Regimental!

#392 heinz

heinz

    New Member

  • General Public Members
  • Pip
  • 8 posts

Posted 09 May 2005 - 09:20 AM

Hello Guys,

I?ve just finished my first 6" spherical shell and like to share the results.

here is a picture from construction:

Posted Image

and here is a picture from the break:

Posted Image

And here is the video:

6" spherical

Technical data

height of break: about 110 meters
total weight: 1 kg
outer stars: 220x tigertail, rolled
pistil stars: 100x green, Mg-based, tigertail primed
other stars: 24x Shimizu golden wave, Zn primed
break charge: BP on corncobs
lifting charge: 50g BP

Greetings
Heinz

#393 Richard H

Richard H

    Pyro Forum Veteran

  • Admin
  • 2,706 posts

Posted 09 May 2005 - 09:40 AM

Very impressive! Well done!

#394 paul

paul

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 722 posts

Posted 09 May 2005 - 11:21 AM

OMG! This shell looks so damn sweet :D

I?m completely impressed :D

My flickr photo album


My first very own firework pictures are online!!!

#395 moe

moe

    New Member

  • General Public Members
  • Pip
  • 9 posts

Posted 09 May 2005 - 11:25 AM

quite nice this shell!! :rolleyes:

theres only one question left concerning the willow-stars. did you cook the composition or only ballmilling and then rolling them?

#396 sasman

sasman

    Sasman

  • General Public Members
  • PipPipPip
  • 490 posts

Posted 09 May 2005 - 11:47 AM

Heinz..That is Fantastic... :D ..perfect symmetry..is it a plastic or paper shell?..

Keep those videos comming.....

#397 ProfHawking

ProfHawking

    3... 2... 1... Umm

  • General Public Members
  • PipPipPip
  • 256 posts

Posted 09 May 2005 - 12:06 PM

looks like plastic hemis from the pic.

and can i add: WOW!!! good job, everything looked perfect!
videos are great! nice one, im in awe

Edited by ProfHawking, 09 May 2005 - 12:06 PM.


#398 heinz

heinz

    New Member

  • General Public Members
  • Pip
  • 8 posts

Posted 09 May 2005 - 03:30 PM

Thank you. :)

Moe - I?ve cooked the tigertail composition, and after that I ballmilled it again.
Just ballmilling and rolling is the next thing I?d like to test, since I use SGRS.

sasman - after assembling the two plastic hemis I?ve pasted them with 10
layers of kraftpaper.

#399 Dj Killerboss

Dj Killerboss

    Firedevil

  • General Public Members
  • PipPip
  • 20 posts

Posted 09 May 2005 - 06:10 PM

Wow you are a very good Pyrotechnic builder. Your shells are better than the shells i can buy. Please give me a konstruction plan. If you speak german you also can give me a german konstruction plan because my english is terrible.

thx a lot to the best shell builder of the world
Do you have fire??

#400 Phoenix

Phoenix

    UKR Forum Ex Regular!

  • General Public Members
  • PipPipPip
  • 544 posts

Posted 09 May 2005 - 07:34 PM

Wow... that really is an excellent shell, and a demonstration of a perfect break without flash. Brilliant!

#401 BurlHorse

BurlHorse

    Burlhorse

  • General Public Members
  • PipPipPip
  • 233 posts

Posted 09 May 2005 - 08:08 PM

Wow... that really is an excellent shell, and a demonstration of a perfect break without flash. Brilliant!

View Post

Nicer Job, Great Symetry, A tip off the the hat to you!!

Stay Green,

Bear
There are old pyros, and there are bold pyros, but there are not very many old, bold pyros....

Check Out My E-Bay Auctions !!

#402 Sprengman

Sprengman

    Member

  • General Public Members
  • PipPip
  • 35 posts

Posted 09 May 2005 - 09:39 PM

Now, after a short break from building Pyrotecnics I?m back to build them again.

Heinz. Thats the best homemade Shell I?d ever seen. :wub:

Question: Du you use only the Tigertail mixture to Prime the Stars? I can?t believe that they ignit without a layer of standart Blackpowder.

And the break is obtained without using a flash booster?

#403 alany

alany

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 740 posts

Posted 10 May 2005 - 03:25 AM

That's absolutely amazing Heinz! The symmetry is excellent. Nice photography too, it is difficult enough to make a great shell, but then capturing it to share with others is a big challenge.

Can you detail the priming scheme on the golden wave stars please, you mentioned Zn? I've been using a rather exotic MgAl based prime on mine and I'd prefer something safer and cheaper.

Edit: typos - damn it proof read before you hit submit Alan!

Edited by alany, 10 May 2005 - 03:26 AM.


#404 paul

paul

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 722 posts

Posted 10 May 2005 - 08:39 AM

If you take a closer look at the pic, you can see that the pumped silverwaves have a greyish coating on the end pointing to the middle of the shell.

I think, thats the zn priming, isn?t it?!

Edited by paul, 10 May 2005 - 08:43 AM.

My flickr photo album


My first very own firework pictures are online!!!

#405 alany

alany

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 740 posts

Posted 10 May 2005 - 09:38 AM

Probably, I saw that too. I was curious about the details.

Also my golden waves are a silver colour from the Aluminium, those look more like organic colour stars.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users