Jump to content


Photo

too much clorine donor?


  • Please log in to reply
7 replies to this topic

#1 Dan

Dan

    Member

  • General Public Members
  • PipPip
  • 108 posts

Posted 28 December 2004 - 03:06 AM

i was wondering what would happen if you were to add to much clorine donor (parlon) if it is even posible. when you add more clorine do the colors get brighter or richer? i'm not sure. searched the net but couldnt find an answer.
thx dan

#2 alany

alany

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 740 posts

Posted 28 December 2004 - 05:49 AM

Eventually the composition won't burn properly as it becomes overloaded with fuel.

#3 paul

paul

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 722 posts

Posted 28 December 2004 - 10:46 AM

There are some mixes around there which use >15g PVC per 100g mix. These often start to give off massive amounts of black ash :D

#4 Sprengman

Sprengman

    Member

  • General Public Members
  • PipPip
  • 35 posts

Posted 28 December 2004 - 11:44 AM

I don?t think that it is possible to use to much PVC or Parlon. The problem is only that the burning rate will be slower.

But it isn?t useful to use to great amounts of chlorine donor. For exsample in Barium containing mixtures it is just necessary to ensure that there is enough chlorine that all the barium can ract do bariumchloride.

Edited by Sprengman, 28 December 2004 - 11:45 AM.


#5 Pretty green flames

Pretty green flames

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 689 posts

Posted 28 December 2004 - 12:17 PM

I dissagree on you 1s sentence there mr spregnman

If you add too much of a chlorine donor the flame will most likely change colour .
I talk from experience.

I added too much of it to a blue comp. and somehow i got a yellow but it was fine earlier when there was just a little of it in.

And there went 100 grams of perfectly fine blue comp.

#6 cat

cat

    Cat's Profile

  • General Public Members
  • PipPip
  • 38 posts

Posted 29 December 2004 - 12:52 AM

I don?t think that it is possible to use to much PVC or Parlon. The problem  is only that the burning rate will be slower.

If you add too much, two things will happen. One the fuel ratio will be overwhelming and the comp will slow or even become unignitable. The other is that chlorine donor is chlorine and other materials will affect the color and the burn temp.

#7 Sprengman

Sprengman

    Member

  • General Public Members
  • PipPip
  • 35 posts

Posted 31 December 2004 - 01:33 AM

Yes, that?s right. You have to change the weight ratio of the fuels and the chlorine donor. Some chlorine containing chemikals also wor as fuel in star compositions. Parlon for exsample is a very good fuel.

I never noticed a change of the color because using to much PVC or Parlon. But I have to say that I didn?t tested many blue burning compositions.

#8 burningbush

burningbush

    Member

  • General Public Members
  • PipPip
  • 68 posts

Posted 31 December 2004 - 10:23 PM

I was wondering what would happen if you were to add to much clorine donor (parlon) if it is even posible. [COLOR=blue]

As with any ratio mix in pyrotechnic its an exact reaction between oxidizer/a fuel/and normally a color donor sometimes requiring a clorine donor to fully convert or react w/ gases or solids to give colors.

If you alter the ratio's to give more clorine donor when its not needed its going to make the stars/ or comets burn slower and it wont be as bright "less color"

I remeber a friend working on a comp where pvc was replaced w/ parlon
and it needed more fuel because pvc is a fuel of sorts as well as a clorine donor.

Saran on the other hand might be worth trying if your dialing in a comp.
because it has more colorine donor per weight then parlon.

Also adding more fuel can sometimes give better colors as a hotter flame helps all reactions occur faster and more readily." red gum" for example

I learned the basics of fuel,oxidizer,color additives realationships in comps from
" Tom Perigrins" book the "Introductory Practical Pyrotechnics" I feel this was absolutly nessary to make a safe and knowledgeable start in making projects,let alone altering comp's or tring to desighn my own.
I'm not saying that one could not obtain better or comparable info from other sources but I highly recomend spending time reading and researching until you understand the basic's before metaling in unfamilar territory which is often unwise and can be unsafe like in the case with kclo3.


P.[COLOR=orange]

Edited by burningbush, 31 December 2004 - 10:33 PM.

[COLOR=purple][SIZE=1][FONT=Impact][B]
I love it! I can buy a pack of smokes which will hurt me for sure! Yet theres a 1000 laws in place to protect me from myself . I guess its ok to harm your self if its slow and will help the economy.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users