Jump to content


Photo

making a press button ignitor


  • Please log in to reply
17 replies to this topic

#16 Draco_Americanus

Draco_Americanus

    Member

  • General Public Members
  • PipPip
  • 102 posts

Posted 28 October 2005 - 02:23 PM

personaly I dislike the idea of using infared light to controll sutch a thing. I have built one channel igniters that used RF, they tend to me a lot more complicated and can still be prone to not working in a reliable manner. In the case of fireworks sometimes going "wireless" is not the best way to go.
Personaly I would love to find one of the old "blast engines" that you see all the time in cartoons. In the past I found one but it was too expensive. I had thought about a digital countdown timer but deemed that unsafe for the simple reason that you are not in direct contact with the igniter to do an emergancy abort if needed.

#17 Kembang Api

Kembang Api

    Member

  • General Public Members
  • PipPip
  • 101 posts

Posted 12 November 2005 - 05:19 PM

Hi Guys,
you need to be able to make a good e-match that fire using 1.5 volts battery,
before deciding to make a firing system. otherwise you will making too big of a system.
For 1 cue system, all you need is just a push button switch, cable and a battery.
If you need info, send me an email.

#18 The Swedish Scientist

The Swedish Scientist

    Member

  • General Public Members
  • PipPip
  • 24 posts

Posted 30 January 2006 - 10:01 AM

I've made one out of a switch with a red safety cap. I mounted it on top of a sawn-off bike handle, and made an index finger hold-to-arm-switch, and a ring to protect that switch from impacts.

it looks kind of... suicidal? :ph34r:

anyway, I wired it to a 12v battery unit (made from 1.2v rechargeable batteries), which is enough to ignite a chemical universal bridgeless igniter.

I'm confused, how did the reusable electrical fuse-igniter work?

Got an idea; using a car part which generates 30KV shocks from a 12V input, and an IR remote system (available at a gadget shop near you), one could make a remote-controlled reliable ignition system. There is just one problem with it; REMEMBER TO INSULATE EVERYTHING, even the wires going into the igniter! 30.000 volts can jump!

If there are any spelling errors I blame the gmail system, used to check the spelling.
If you make it bulletproof they'll just make a bigger bullet.
If you make it waterproof they'll just make a deeper ocean.
If you make it foolproof... They'll just find 'emselves a redneck!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users