Jump to content


Photo

Black powder VS Flash powder


  • Please log in to reply
17 replies to this topic

#16 felixthecat

felixthecat

    Member

  • General Public Members
  • PipPip
  • 16 posts

Posted 09 May 2013 - 10:57 AM

hi m8,,why dont u make some 3/4"id rammed black powder(75/15/10) thunderflashes...i did unintentionally when i started trying to make rockets... and you dont need a ball mill.the kn03 is ground to talc in a mp,the sulphur will just need the lumps kneaded out if its pyro grade i do this on a small sheet of plastic with a teaspoon and you will need airfloat charcoal,,i think it was vine i had then...now for the tooling...lol u will need,,,a 1" thick pice of wood,,4"sq is fine,, a 6" nail and a 3/4 piece of round dowel 7"long with a hole drilled 5.5" deep thru the centre the same dia as the nail and another length with no hole....i mix my bp shaking in a coffee can untill my arms are sore,,you will want to put tape round the lid so you can do this indoors without any dramas you can then open it outside to disloge all the powder trapped in gaps without making a mess....hammer the nail thru the centre of the wood,,by the time your doing this your 3/4 id 7" long cardboard pyro tubes will have arrived,,, place 1 over the top of the nail and centre then pour a teaspoon of bp in(a paper funnel is a must) insert the hollow rammer over the nail, slide down and bed firmly in the powder now your redy to ram (if you dont have a soft mallet pad a hammer with rags untill u do) 4 or five sharp smacks will do,you will feel the bp compressing with the first few hits,repeat this process untill your above the nail then switch to the solid rammer untill ur 1/4" from the top then twist off the nail and there you have it,,,now you may want to have another nail sawn in half so you can make smaller ones..a piece of visco is inserted well into the core taped up and the other end plugged..the 7" one will have 35g+ of rammed green meal and will make a lovely thump but halfsize is more doable in the garden...to give you an idea about flash,,,3g with a light confinement will be louder than the 7" bp thunderflash but its a sharp bamg not a lovely round thump and the smell of bp...aaahhhhhhh...u can also ram foutain compositions in ur tubes

#17 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,960 posts

Posted 09 May 2013 - 05:05 PM

????? What are you on about.

 

This is a 5 year old post you have replied to.

 

P.S one of the hardest to read posts I have ever read.


  • PyroSkitz likes this
Phew that was close.

#18 Deano 1

Deano 1

    Pyro Forum Regular

  • UKPS Members
  • 412 posts

Posted 10 May 2013 - 09:31 PM

hi m8,,why dont u make some 3/4"id rammed black powder(75/15/10) thunderflashes...i did unintentionally when i started trying to make rockets... and you dont need a ball mill.the kn03 is ground to talc in a mp,the sulphur will just need the lumps kneaded out if its pyro grade i do this on a small sheet of plastic with a teaspoon and you will need airfloat charcoal,,i think it was vine i had then...now for the tooling...lol u will need,,,a 1" thick pice of wood,,4"sq is fine,, a 6" nail and a 3/4 piece of round dowel 7"long with a hole drilled 5.5" deep thru the centre the same dia as the nail and another length with no hole....i mix my bp shaking in a coffee can untill my arms are sore,,you will want to put tape round the lid so you can do this indoors without any dramas you can then open it outside to disloge all the powder trapped in gaps without making a mess....hammer the nail thru the centre of the wood,,by the time your doing this your 3/4 id 7" long cardboard pyro tubes will have arrived,,, place 1 over the top of the nail and centre then pour a teaspoon of bp in(a paper funnel is a must) insert the hollow rammer over the nail, slide down and bed firmly in the powder now your redy to ram (if you dont have a soft mallet pad a hammer with rags untill u do) 4 or five sharp smacks will do,you will feel the bp compressing with the first few hits,repeat this process untill your above the nail then switch to the solid rammer untill ur 1/4" from the top then twist off the nail and there you have it,,,now you may want to have another nail sawn in half so you can make smaller ones..a piece of visco is inserted well into the core taped up and the other end plugged..the 7" one will have 35g+ of rammed green meal and will make a lovely thump but halfsize is more doable in the garden...to give you an idea about flash,,,3g with a light confinement will be louder than the 7" bp thunderflash but its a sharp bamg not a lovely round thump and the smell of bp...aaahhhhhhh...u can also ram foutain compositions in ur tubes

Was ya pi553d when ya typed this lot up dude :lol:


  • megabusa , Sparky and PyroSkitz like this
Our saviours : In the ninth century, a team of Chinese alchemists trying to synthesize an "elixir of immortality" from saltpeter, sulfur, realgar, and dried honey instead invented gunpowder.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users