Jump to content


Photo

Looking for some suggested formulas


  • Please log in to reply
37 replies to this topic

#31 dannytsg

dannytsg

    Member

  • General Public Members
  • PipPip
  • 167 posts

Posted 06 September 2014 - 05:43 PM

Did the tube burn through at the side, that is a possible cause of it dying down, or it may just need a choke to keep up the pressure. A good start. The addition of metals can raise the temperature. If you ever get on to Barium Nitrate and Aluminium mixes, some of those produce tremendous heat and need very thick walled tubes.

Keep up the good work. :)


The tube did start to burn after a few second but that's my own doing as I rolled them myself. I thought it was worth rolling my own tubes for the first few experiments until I get a feel for how it works and also the safety in making them.

"Life - It is what it is"


#32 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 06 September 2014 - 05:48 PM

A loose powder can propagate a flame completely through in milliseconds so any normal powder will go bang, a pressed powder will burn from the end (like a cigarette! (anyone remember those))


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#33 dannytsg

dannytsg

    Member

  • General Public Members
  • PipPip
  • 167 posts

Posted 06 September 2014 - 08:10 PM

Well I gave it a second go tonight and managed to make 2 fountains with my home made tubes. Both contained approx 10 grams of BP+Al composition in an 8g+2g ratio.

 

I got some nice effect from them however now I think it is time to get some good sturdy tubes and invest in some better materials such as clay etc to progress this further. For my first two experiments with fountains I am happy with how they have gone, I guess it only gets more addictive from here!

 

Apologies for the video watermark on the video, the software I have is only a trial.

 


Edited by dannytsg, 06 September 2014 - 08:11 PM.

"Life - It is what it is"


#34 helix

helix

    Member

  • UKPS Members
  • 151 posts

Posted 07 September 2014 - 07:37 AM

You could try making a glitter fountain, most glitter comps  use antimony trisulfide and are normally based on star comps.

 

Here's one from passfire with no antimony trisulfide however you would need to raid the kitchen or go to the supermarket to get some baking soda

 

Gold Glitter (no antimony trisulphide) - Troy Fish

 

KNO3 -  55

S - 17

Charcoal (airfloat) - 11

Baking Soda - 7

Aluminium (spherical 400 mesh) - 5

Dextrin - 5

 

 

I haven't tried it and its probably not the best glitter but may be worth a shot, you could prob just omit the dextrin.

 

cheap cat litter (bentonite type) works fine for clay



#35 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 08 September 2014 - 09:05 AM

Well D1 is a nice glitter star and it uses bicarb and spherical aluminium, Find D1 star mix and press some into a tube try a minor choke.


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#36 dannytsg

dannytsg

    Member

  • General Public Members
  • PipPip
  • 167 posts

Posted 08 September 2014 - 09:07 AM

Well D1 is a nice glitter star and it uses bicarb and spherical aluminium, Find D1 star mix and press some into a tube try a minor choke.

 

Thanks for that I have found it as follows:

 

Component Percentage Ounces   

Black powder meal 0.71     

Sulfur 0.11    

Aluminium Powder 0.07    

Sodium Bicarbonate 0.07    

Dextrin 0.04      

 

I am planning on getting some proper tooling and 3/4" tubes from oliver brown at the end of the month so hopefully I'll get some better results with better gear.


Edited by dannytsg, 08 September 2014 - 09:09 AM.

"Life - It is what it is"


#37 dannytsg

dannytsg

    Member

  • General Public Members
  • PipPip
  • 167 posts

Posted 12 September 2014 - 08:55 PM

I've taken then down as I am going to re-edit them into one sequence video shortly. Just at the blackpool fireworks so it won't be done until next week

"Life - It is what it is"


#38 GreenCopperFlame

GreenCopperFlame

    New Member

  • General Public Members
  • Pip
  • 4 posts

Posted 24 October 2014 - 08:41 PM

 

Nice, thanks for this. I can't wait to built my first fountain. Dannytsg, yours is legit.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users