I tried to make PbO2 anode by Electrolysis method but I faild, I made PbO2 as chemical (By PbO+NaOCl) and mold my new powder with Polyster Resin (90%PbO2 + 10%Resin) at first it was very good in NaCl solution but when I tried to make perchlorate (350mA/cm^2) it is faild. I need more technical data about this subject.
All about Lead Dioxide Anode
Started by amego, Aug 12 2005 09:26 AM
1 reply to this topic
#2
Andrew
-
- General Public Members
-
- 603 posts
Rocket Scientist, no really, I am!
Posted 12 August 2005 - 09:42 AM
I tried to make PbO2 anode by Electrolysis method but I faild, I made PbO2 as chemical (By PbO+NaOCl) and mold my new powder with Polyster Resin (90%PbO2 + 10%Resin) at first it was very good in NaCl solution but when I tried to make perchlorate (350mA/cm^2) it is faild. I need more technical data about this subject.
This post pops into mind, it's come up alot recently
Nice first post...
Mybe you could try this
That post springs to mind!
Search and 'ye shall find!
There has been intense discussion about this topic. There are several threads, one about Perc synthsis, another about anode production to start.
I know it's difficult to get around a forum, but searching is always a good start.
Edited by Andrew, 12 August 2005 - 09:45 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
