Jump to content


Photo

Rocket Tooling


  • Please log in to reply
94 replies to this topic

#76 pyromaniac303

pyromaniac303

    Member

  • UKPS Members
  • 632 posts

Posted 06 September 2007 - 08:10 PM

The other day I used the lathe at work to make an end burner bottle rocket tool (6mm tube diameter).

Material is 6mm aluminium round bar, an M6x1 thread in the base and for the changeable spindles, the base is made of a large 3" scrap piece of aluminium they gave me in the tool room at work. The hole size formed by the spindle is 1.95mm, 11mm in length, and a 3+1/2" rammer with a 2mm hole drilled to a depth of 15mm, to give plenty of clearance for the 1.95mm spindle.

The tube holder (I dont really know what this bit is called, the area that is just 6mm after the thread but before the spindle) is 3.5mm long and if I made another one I'd make this a bit longer, as it doesnt hold the tube very straight, but it still works.

Fuel is normal BP + 10% metal powder, and I also have in mind using it with a weak sugar based propellant for a model plane Rapier.cz motor replacement.

I have these working with titanium sponge and they leave a great trail, with the silver sparks still visible as the rocket reaches its peak height and burns out.

Posted Image
You can never have a long enough fuse...

#77 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 14 September 2007 - 03:47 PM

Just picked up some AluBronze bar and a large 75mm x 75mm x 150mm aluminium block. So in the near future I will be machining up some new tooling out of some nice non-sparking material and a casing to stop the tubes splitting on my 30 tonne air powered hydraulic press. Repeatability here we come.
Phew that was close.

#78 Pieman

Pieman

    Member

  • General Public Members
  • PipPip
  • 41 posts

Posted 20 October 2007 - 10:29 AM

I want to order some rocket tooling from Greg, does anyone know how to get in touch with him? Does he have a new website yet?
Here The Forsaken

#79 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 20 October 2007 - 11:01 AM

I want to order some rocket tooling from Greg, does anyone know how to get in touch with him? Does he have a new website yet?



If you email me I think Ive his contact details somwhere Ill forward them

Phill

#80 Jerronimo

Jerronimo

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 345 posts

Posted 20 October 2007 - 03:05 PM

www.pyrotooling.com

:rolleyes:
"Any society that would give up a little liberty to gain a little security will deserve neither and lose both."

#81 marble

marble

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 502 posts

Posted 20 October 2007 - 04:15 PM

Ive got some tooling in the mail from greg, should be good

#82 willd

willd

    willd

  • General Public Members
  • PipPip
  • 45 posts

Posted 04 November 2007 - 05:08 PM

I emailed Greg a week or 2 ago how long does he normally take to reply.

#83 marble

marble

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 502 posts

Posted 04 November 2007 - 09:48 PM

Responded to me within a 48 hours

Ill take some photos of my tooling, its top stuff :)

#84 Pieman

Pieman

    Member

  • General Public Members
  • PipPip
  • 41 posts

Posted 07 November 2007 - 11:17 PM

My tooling arrived from greg yesterday it looks amazing!!! I went for the 1/2 inch and 3/4 inch BP set. Can't wait to try it out. Now I need somewhere to fire it and a good BP comp to put in it. I'll let you know how i get on.
Here The Forsaken

#85 overflow

overflow

    Member

  • General Public Members
  • PipPip
  • 102 posts

Posted 26 November 2007 - 11:34 AM

I'm about to make an order with supreme pyro:
1 25mm discount brass rocket tool(spindle, hollow rammer, solid rammer) [15,9€],
1 12mm brass rocket tool (spindle, hollow rammer, solid rammer)[12,5€].

+ Shipping cost 25.5€
+ 5€ paypal fee
=
58.9€

Is it reasonable?

Any comment on the size of the discount tool?

Also i was wandering about the 12mm tool's size. I was thinking of:
spindle size from 5mm diameter on the bottom
to 3mm on the top
spindle length 2,5 cm
The spindle being so short is also good for fountains, right?

Any advice would be warmly received. :)

#86 overflow

overflow

    Member

  • General Public Members
  • PipPip
  • 102 posts

Posted 18 December 2007 - 06:41 PM

Received my tooling from supreme pyro today.
Shipping was faster than expected (it took no more than 10 days from payment)

I received (for 65€)
1 25mm spindle, 1 hollow rammer, 1 solid rammer
2 12mm spindles(1 for rockets, 1 for fountains), 2 hollow rammers (???), no solid rammer.

Apart from the 2 hollow rammers, everything was as expected and seems quite solid.

#87 marble

marble

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 502 posts

Posted 19 December 2007 - 09:28 AM

Tooling aint bad but if your going to make sure she knows what you want. Don't just say 3/4", send a detailed drawing.

#88 will-TM

will-TM

    Member

  • General Public Members
  • PipPip
  • 17 posts

Posted 20 December 2007 - 10:02 PM

I too can recomend wouters pyro tools.

They sent me 5 free tubes with my 2oz rocket tools and a letter too, saying that they were my cousins sending garden tools or somthing

:)

#89 marble

marble

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 502 posts

Posted 22 December 2007 - 12:19 PM

As if any customs worker is going to know what it is anyway ;)

My Greg Boyd stuff has been sitting here doing nothing, had a few CATO's (probally my fault for not making decent fuel) and I've lost morale. Its a lot of effort making a good fuel, my supremepyro gear is good as it has a short core :)

Edited by marble, 22 December 2007 - 12:25 PM.


#90 will-TM

will-TM

    Member

  • General Public Members
  • PipPip
  • 17 posts

Posted 22 December 2007 - 09:49 PM

I have been using greenmix for 2oz rockets with +3% Al for a nice tail and havnt had a cato with them yet




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users