Jump to content


Photo

Sodium Nitrate Compositions


  • Please log in to reply
35 replies to this topic

#31 jcow

jcow

    master of disturbing neighbours

  • General Public Members
  • PipPip
  • 45 posts

Posted 28 March 2006 - 09:37 PM

Always, in pyrotechnics, including rocket props, measurements are by *weight*.


ok, silly me. forget everything i've said about my compositions! there were all measured by volume. time to start from scratch again. suppose i read a recipe for a composition measured by volume and i stuck with it.
thanks.

#32 EnigmaticBiker

EnigmaticBiker

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 365 posts

Posted 29 March 2006 - 09:02 AM

ok, silly me. forget everything i've said about my compositions! there were all measured by volume. time to start from scratch again. suppose i read a recipe for a composition measured by volume and i stuck with it.
thanks.

Using volume is a problem because volume can change depending on what form the chemical is in.

Using weight means it's repeatable and chemical equations can be converted directly to compositions.

Read pinned posts in Pyrotechnic Chemistry section etc. It may save you a lot of hassle/limbs.

No amount of help with compositions will work if you don't understand the basics.


#33 selwyndog

selwyndog

    Member

  • General Public Members
  • PipPip
  • 10 posts

Posted 14 February 2007 - 12:36 AM

I've used sodium nitrate for years as it was freely availble in a local hardware store for about £2 for a few kelo's. Sodium Nitrate has a lower molecular mass so not as much is requires 101g KNO3 can be replaced by 85gNaNO3.Sodium nitrate is also more reactive than it potassium counterpart so theoretically GP made with this salt is both more energetic and rapid in it's reaction, however it's hygroscopic behaviour tends to slow the material down with storage. It can be dried off in a flat pan heated with steam after which it's speed is restored.
The composition I usually use is 170g NaNO3, 32g S and 36g C. Rockets made with this composition have flown very sucessfully

#34 icarus

icarus

    Pyro Forum Regular

  • UKPS Members
  • 332 posts

Posted 20 January 2008 - 02:21 AM

sodium nitrate is ok for white smoke with sugar and melted paraffin wax as the wax overcomes the hygroscopic nature of NaNO3
protodezine@gmail.com

#35 MDH

MDH

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 742 posts

Posted 25 January 2008 - 08:29 PM

Sodium nitrate makes an excellent yellow with magnesium, provided the stuff is dichromated.

#36 GalFisk

GalFisk

    Member

  • General Public Members
  • PipPip
  • 39 posts

Posted 26 January 2008 - 04:33 PM

You may treat the Mg with linseed oil, dichromate is only neccessary when it is used in conjunction with ammonium perchlorate.
Sodium nitrate+sodium benzoate 60/40 gives a nice orange flare as well. +10% MgAl increases the brightness. I'll try sodium nitrate+MgAl some time.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users