Jump to content


Photo

4 inch mine shell


  • Please log in to reply
23 replies to this topic

#1 Frozentech

Frozentech

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 389 posts

Posted 05 April 2006 - 06:14 AM

Here's a video of a 4 inch mine shell I just shot this evening. It used 20 grams of lift under 50 grams of Winokur 12 glitters and 50 grams of mixed Veline orange and purples. What a fun way to use 'left-over' stars. Next one of these I make I will double the number of stars I think :)

Posted Image
"The word unblowupable is thrown around a lot these days, but I think I can say with confidence..."
KAABLAAAMMM!!!
"OK... that shows you what could potentially happen."
--Homer Simpson

#2 sizzle

sizzle

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 600 posts

Posted 05 April 2006 - 07:02 AM

Wow, that was quite a nice mine, nice hang time on those Winokurs.
Category 4 Trained to BPA Level 1 Equivalent.

#3 Pretty green flames

Pretty green flames

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 689 posts

Posted 05 April 2006 - 07:38 AM

Maybe try using a shorter mortar so you get a wider spread. it's hard to enjoy the nice effect of the stars if they're all bunched up.
Apart from that good job.

#4 PYRODUDE!!!

PYRODUDE!!!

    Member

  • General Public Members
  • PipPip
  • 78 posts

Posted 05 April 2006 - 03:28 PM

Nice work, would be nice if ou got some crackle too. Did you use an electic fuse?

#5 Frozentech

Frozentech

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 389 posts

Posted 05 April 2006 - 04:22 PM

Nice work, would be nice if ou got some crackle too. Did you use an electic fuse?


I *knew* I forgot something ! LOL.... I have 100 grams of crackling dragon eggs, I was meaning to toss a handful in that mine, but forgot and just sealed it up so I could light something. Next time....
"The word unblowupable is thrown around a lot these days, but I think I can say with confidence..."
KAABLAAAMMM!!!
"OK... that shows you what could potentially happen."
--Homer Simpson

#6 PYRODUDE!!!

PYRODUDE!!!

    Member

  • General Public Members
  • PipPip
  • 78 posts

Posted 05 April 2006 - 06:50 PM

I think they would look nice in a rocket or arieal shell. Mine's too but that's a little dangerous. They go everywhere!

#7 jamesy

jamesy

    Richard James

  • General Public Members
  • PipPip
  • 20 posts

Posted 05 April 2006 - 10:12 PM

WOW Frozentech... that is really cool, good work man. Looks like you got some serious height - how high do you think the stars went ?
www.PyroWiki.com - an online pyrotechnic knowledge base that anyone can edit - share your knowledge

#8 Frozentech

Frozentech

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 389 posts

Posted 06 April 2006 - 12:37 AM

WOW Frozentech... that is really cool, good work man. Looks like you got some serious height - how high do you think the stars went ?


I am just guessing about 25 meters / 80 feet. it may have been a bit more.
"The word unblowupable is thrown around a lot these days, but I think I can say with confidence..."
KAABLAAAMMM!!!
"OK... that shows you what could potentially happen."
--Homer Simpson

#9 littlejohny

littlejohny

    Member

  • General Public Members
  • PipPip
  • 129 posts

Posted 06 April 2006 - 08:57 AM

I personally think it would have looked better later at night when it was more darker, very cool though :)

#10 Frozentech

Frozentech

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 389 posts

Posted 06 April 2006 - 03:52 PM

I personally think it would have looked better later at night when it was more darker, very cool though :)


I would have liked it darker too. That's a major problem with the increasing hours of daylight here in Alaska, it doesn't get decently dark at my latitude until too late to be out firing stuff. By mid-summer it will not get any darker than in that video even at 1 AM in the morning. 4th of July displays are not that great up here as a result.
"The word unblowupable is thrown around a lot these days, but I think I can say with confidence..."
KAABLAAAMMM!!!
"OK... that shows you what could potentially happen."
--Homer Simpson

#11 karlfoxman

karlfoxman

    Resident Maltese shell builder

  • General Public Members
  • PipPipPipPip
  • 1,139 posts

Posted 31 August 2006 - 11:42 AM

Hey folks,

I have been experimenting with 100mm mines, I have made and tested a glitter w/ flash mine and it worked great! Huge 100ft colum of glitter and then 5 loud 1.5second salutes breaking over the top. Construction was a tube with one end pleated and sealed. Then 35g of fast willow liftpowder, on top of this was a disk with 3 holes. Then I placed 20 1/2" glitter stars made with D1 glitter, they had no prime. Above this was 5 3/4" ID 1.5" long tubes filled with 5g flash each. They were sealed both ends with hot glue and then paper was pasted over the ends. Before filling with flash a piece of time fuse cut diagonal at one end and hole punched at other was pushed into a hole in the side. This is then sealed with hot glue and crossmatched with 2 starnds of blackmatch, then cotton was wound around the two to secure it. I was very pleased with the results, the use of a commercial mortar made the star colum high and not very wide but the glitter made up for this. I would have had a video but my DV Camera charger has gone walkies for the moment. I will make more and add a variation by underneath the glitter stars adding some nice conkling blue stars. I will get some pictures of the construction and the videos of finished items.

#12 BrightStar

BrightStar

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 900 posts

Posted 31 August 2006 - 06:40 PM

Karl - Look forward to the photos - should be good!

I used a 3" bag mine as a finale to a recent family show, using up my spare stars (about 80g total of nitrate flash, D1 glitter and others) with my leftover BP coated corn-cob burst (about 35g). The audience loved it but it partially blew the base out of the mortar, effectively destroying it.

I would love to have some lift / star ratios and weight guidelines for various sizes of mine. Any ideas folks??

Edited by BrightStar, 31 August 2006 - 07:10 PM.


#13 karlfoxman

karlfoxman

    Resident Maltese shell builder

  • General Public Members
  • PipPipPipPip
  • 1,139 posts

Posted 31 August 2006 - 08:22 PM

I use the samerule as for shells, so my standard 4" would use 35g lift. Ive now made 35 more flash salutes for the mines and im now making some beraq cases the tradidtional way. They are coming on well, dont you just love the mess that paste makes! :D

#14 portfire

portfire

    Pyro Forum Top Trump

  • General Public Members
  • PipPipPipPip
  • 1,231 posts

Posted 24 July 2007 - 12:21 PM

Hi folk's,hers my 2x50mm bag mines

http://video.google....196069371251275

In the first one the stars were;chrys#6,D1 glitter,lancaster's KP#1 red,and i used a 15g lift bag.

The second one has Phiko KP#1 blue and 5 nitrate flash salutes (WARNING flash is dangerous!!.I mixed 1g at a time behind a plexiglass screen)which three failed to fire,funny,because they were all made the same.

No prefire pics,but they were made to my neurotic high standard :rolleyes: .I'm currently working on getting a longer delay from D1.I have a small batch drying and should be ready for another mine this weekend.

I'll say onething though,it's a great feeling sliding the bag into the mortar tube. :D
"I reject your reality and substitute my own" Adam Savage

#15 dr thrust

dr thrust

    Pyro Forum Top Trump

  • General Public Members
  • PipPipPipPip
  • 1,408 posts

Posted 25 July 2007 - 10:04 PM

hi, dean yes nice i enjoyed the blue stars,whats the comp :) and seeing your user names portfire got any comps for portfires :lol:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users