Firecrackers
#16
Posted 03 April 2007 - 08:51 PM
Please listen to the advice given,every composition demands the respect it deserves (thats common sense).
stay safe,(and keep your fingers) and stay green
#17
Posted 03 April 2007 - 09:33 PM
Oh blur sorry that I am late. Though its a bit dangerous but I did the same thing when I did not have acces to much chemicals so I will tell you the answer which common sense says. I am not too good at all those confinement and burn rate but common sense just says that either there are impurities making it burn slow or either the tubing is too strong. Just use some better explosive(either made at home or emptied from firecrackers) and use a weaker tubing. Fill almost 2/3 of the tubing and use enough glue to ensure that those paper bits(used as caps) are properly fixed. Make a good fuse(I prefer using a long quickmatch) so that you dont have to make a big hole for it. These are just basics and dont need much knowledge about pyrotechnics.
Hope this helps. And let me remind you, this is common sense.
I could be wrong but the "long quickmatch" method he uses, i think, is different to what your thinking. If he ignites salutes this way and he has done so without injury i think he means that he makes a long quickmatch that can be ignited far away at a safe distance. You would need a long quickmatch though depending on the salute and this would probably be quite a waste of quickmatch but i geuss if the quickmatch was, for example, 5 meters long and he ignites a carboad salute from that 5 meters away it is then safe.
#18
Posted 03 April 2007 - 09:46 PM
#19
Posted 03 April 2007 - 09:55 PM
#20
Posted 03 April 2007 - 10:02 PM
EDIT: I'm just simply saying what can a WEAK paper salute/firecracker do to you 5 metres away?
Edited by Zinginex, 03 April 2007 - 10:18 PM.
#21
Posted 03 April 2007 - 10:11 PM
A Salute????!!! 5 meters???!! WRONG! Im tempted to close this thread as its getting silly.
Im surprised Karl that you havn't closed this tread earlier to be honest,iv seen treads like this closed after one reply.you do a good job though Karl .
Maybe he ment blackmatch (even then i wouldn't use it for a salute )
Edited by portfire, 03 April 2007 - 10:19 PM.
#22
Posted 04 April 2007 - 05:49 AM
Im surprised Karl that you havn't closed this tread earlier to be honest,iv seen treads like this closed after one reply.you do a good job though Karl .
Maybe he ment blackmatch (even then i wouldn't use it for a salute )
Might as well close it, because the OP doesn't know what quickmatch even is evidently. 5 meters of QM being lit would whip and blow quite impressively on it's own ! Likely more powerfully than his "weak salute".
KAABLAAAMMM!!!
"OK... that shows you what could potentially happen."
--Homer Simpson
#23
Posted 04 April 2007 - 06:49 AM
#24
Posted 07 April 2007 - 07:00 AM
No one pointed blur wrong(blur I am sorry but I had to do this) but as soon as I said that the explosive can be emptied out from firecrackers, everyone became angry. I said this just because blur did this and its expected that he did this because he did not have much access to chemicals.
The quickmatch I was talking about should(according to me) be long enough to keep you at a safe distance. I dont like to use blackmatch because the one I make is not reliable. It extinguishes very easily. If anyone knows why please tell me.
And I agree that I am not much experienced. Having common sense does not mean that you are an experienced pyro.
Common sense is not common
It can be seen in this topic.
And Karl just wondoring why dont I see other moderators so active?
#25
Posted 07 April 2007 - 07:37 PM
About the casing being too thick for an explosion, and it being common sense, well it was complete opposite. The casing was too weak which created no pressure within the tube (needed for an explosion).
#26
Posted 08 April 2007 - 01:06 AM
About emptying firecrackers, everyone knows they use( at least were I live) flash powder, it just takes a long time to get it all out, gets clay in the flash, and is not worth the trouble, but there's nothing exceptionally dangerous about it. (If there is, please tell me, I want to keep my fingers)
#27
Posted 08 April 2007 - 03:44 AM
Do you guys just point blank refuse to read past posts and threads on all the issues you are discussing here!
1. Flash IS DANGEROUS. ( there are many posts explaining this and the reasons fo it)
2. Emptying fireworks IS DANGEROUS (because you dont actually KNOW what it is you are emptying or how it will react in larger quantities or with other compositions you may accidently or purposfully mix or contaminate it with)
3. BLACK match and QUICK match have some simalaritys but for the most importaint part of them which is speed of fire transfer along their length. Black match can be safely used in the right scenario as a delay fuse to ignite a device and retire to a safe distance quick match cannot and should be classed as an instant ignitior no matter what its length.
4. this post is the blind leading the blind the casing should be strongenough to contain the combustion but flimsy enough to disintegrate to avoid shrapnel. I chalange anyone to suply a container of any sorts strongenough to actually contain even a bp charge without bursting!
5. Firecrackers contain "composition" not explosives.
6. King pyro if you are still unable to produce reliable black match then I am seriously concerned with your knowlege about just general pyrothecnic practice. Saftey of others would be my bigest worry with the misinformation you are dispensing in this thread you simply do not know what you are talking about.
READ THREADS about all this and you will at least understand the problems have had to overcome to get results before you.
Click here for Cooperman435, THE online shop for chemicals, materials and tooling
Click here to email me Personally,
Click here to email Optimum Fireworks, West Yorkshire's premium Display Company
#28
Posted 08 April 2007 - 11:04 AM
Alright its good that you dont do this anymore.
AND I know the difference between black match and quickmatch and I use a lOOOng QUICKMATCH.
And flash is dangerous but if one takes adequate care its not that dangerous(atleast according to me), especially the one used in small firecrackers(I hope you emptied it from those small cylindrical ones).
I confess that I can not make good blackmatch(I can not even make an average one), and I would like to know the reason if anybody knows.
Those compositions are also low explosives so theres no harm in using the word explosives in general.
[s]
I AM A BEGINNER.
Edit-what does this 's' do.
Edited by king pyro, 08 April 2007 - 11:05 AM.
#29
Posted 08 April 2007 - 11:09 AM
#30
Posted 08 April 2007 - 11:24 AM
I would be intrested to see your working area, this way we can say if your being as safe a possible with this hobby. If you have quickmatch then im sure you can get hold of visco fuse?! Or are you making the quickmatch?
I always prefer making rather that buying. So I have made the quickmatch.
[I didnt even buy a weighing scale from ebay as you said; I bought it from a shop near my house; though it was a bit more expensive but as I said I'll think a few times before I purchase it through the net].
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users