Jump to content


Photo

Star compozition whit Barium Hydroxide


  • Please log in to reply
11 replies to this topic

#1 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 21 April 2007 - 05:33 PM

What stars can i make whit barium hydroxide or in what can i transform it(chemycaly) so it would be good for something?

#2 Pretty green flames

Pretty green flames

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 689 posts

Posted 21 April 2007 - 05:44 PM

What stars can i make whit barium hydroxide or in what can i transform it(chemycaly) so it would be good for something?



Mix it with some nitric acid and you've got yourself some barium nitrate which is pretty usefull (Strobe stars, glitters, silver stars...)

#3 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 21 April 2007 - 05:59 PM

Just a problem.....I don't have anymore HNO3(i got mine from my highschool'laboratory and i can't get anymore),but I will make some from H2SO4 and KNO3.

#4 napfi

napfi

    New Member

  • General Public Members
  • Pip
  • 2 posts

Posted 24 April 2007 - 09:34 PM

Mix it with some NH4(NO3)2 an you've got barium nitrate too.


BaOH + NH4(NO3)2 --> Ba(NO3)2 + NH3 + H2O

#5 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 25 April 2007 - 05:58 PM

I did think about that but I have to do it out side because de NH3 smels very bad.Thanks for the idea.

#6 MMMMMM Pyro

MMMMMM Pyro

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 209 posts

Posted 25 April 2007 - 07:02 PM

Mix it with some NH4(NO3)2 an you've got barium nitrate too.
BaOH + NH4(NO3)2 --> Ba(NO3)2 + NH3 + H2O


If I'm not wholly incorrect, Ammonium Nitrate is NH4NO3 not NH4(NO3)2, hence, that reaction would need re-balancing.

Regards,

Mike

#7 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 26 April 2007 - 05:57 PM

Yes you are right.The corect formula is NH4NO3 and the barium hydroxide is Ba(OH)2.

Edited by TzaRocket, 27 April 2007 - 05:31 AM.


#8 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 26 April 2007 - 06:18 PM

Oh, and the reaction is :


Ba(OH)2 +2NH4NO3 ->Ba(NO3)2 +2NH3 +2H2O

So work on your chemestry:).

#9 karlfoxman

karlfoxman

    Resident Maltese shell builder

  • General Public Members
  • PipPipPipPip
  • 1,139 posts

Posted 26 April 2007 - 08:29 PM

Work on your spelling! Sorry could'nt resist that. :P

#10 TzaRocket

TzaRocket

    Member

  • General Public Members
  • PipPip
  • 46 posts

Posted 27 April 2007 - 05:36 AM

OMG..It's not working.I calculated the reaction and how much amount of NH4NO3 I needed and the reaction doesn't work.In most reactions of a hydroxide(NaOH) and NH4NO3 I get a clear solution that recristalizes easy.But when I mixt the two the Barium hydroxide stays on the botom and doesn't react.I think I'm trow and forget about it.In Romania you can't store any reactants and you don;t have were to buy them and even if you have they are to expensive.

#11 Mumbles

Mumbles

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 955 posts

Posted 04 May 2007 - 07:28 AM

It's due to the insolubility of the hydroxide. Try boiling the solution.

#12 Andrew

Andrew

    Rocket Scientist, no really, I am!

  • General Public Members
  • PipPipPip
  • 603 posts

Posted 05 May 2007 - 01:48 PM

I will make some from H2SO4 and KNO3.


Good luck, do report back when you find a practical method.

Anyway, Conc Sulphuric acid is just as hard to get hold of as conc Nitric acid. You can buy conc Nitric Acid for about £4/Litre.


Dissolving Barium Hydroxide in dilute Nitric Acid is the best way of making Barium Nitrate. See the BaCO3 to Ba(NO3)2 thread because the method discussed is exactly the same.



Work on your spelling! Sorry could'nt resist that. :P


nice :)




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users