Jump to content


Photo

STAR PLATES to Spain...


  • Please log in to reply
5 replies to this topic

#1 anacronismo

anacronismo

    Member

  • General Public Members
  • PipPip
  • 10 posts

Posted 14 June 2008 - 06:44 PM

Someone knows where I can to buy several STAR PLATES and that send to Europe?
(Concretly the sending is to Spain)

NOTE:
Woter Pyro tools (I believe) is extra expensive in the tools and the parcel, and confirmed Skylighter off: 1/1/2008 skylighter discontinued all shipping overseas... Buahhh :(
" I am never expert... because always I am a pupil "

75-15-10. It is everything what you need to know in this life.


#2 Pyrogeorge

Pyrogeorge

    Member

  • General Public Members
  • PipPip
  • 142 posts

Posted 14 June 2008 - 10:59 PM

http://www.freewebs.com/supremepyro/

#3 anacronismo

anacronismo

    Member

  • General Public Members
  • PipPip
  • 10 posts

Posted 15 June 2008 - 09:32 AM

http://www.freewebs.com/supremepyro/


Uhmm... <_< They have quality these Chinese tools?

You know some another Star Plates web site better than supremepyro ? (exclude Wolter pyro tools and Skylighter; of course)
" I am never expert... because always I am a pupil "

75-15-10. It is everything what you need to know in this life.


#4 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 15 June 2008 - 09:59 AM

I think your asking a lot now. Its either cheap - and cheap or Pricey and high quality. Your not going to get high quality for cheap money!

#5 Pyrogeorge

Pyrogeorge

    Member

  • General Public Members
  • PipPip
  • 142 posts

Posted 15 June 2008 - 03:11 PM

Uhmm... <_< They have quality these Chinese tools?

You know some another Star Plates web site better than supremepyro ? (exclude Wolter pyro tools and Skylighter; of course)


I bought 2 star plates and they are very good for the price..but if you want better quality you must pay much more.

#6 Sambo

Sambo

    Member

  • General Public Members
  • PipPip
  • 96 posts

Posted 15 June 2008 - 03:39 PM

If you want good quality tooling for cheap you're going to have to make it yourself, or ask around some machine shops to see if they will do it. Even if they drill the plates, its easy enough to cut and de-burr some brass rod and super glue it into the plates yourself.
I dont think supremepyro tooling is that bad anyway - not the best, but better than nouthing.
Currently firing for Pendragon Fireworks




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users