Jump to content


Photo

Barium and Strontium Perchlorates...any use in pyro?


  • Please log in to reply
9 replies to this topic

#1 Gary

Gary

    Member

  • General Public Members
  • PipPip
  • 49 posts

Posted 14 November 2008 - 11:09 PM

Are the perchlorates of barium and strontium hardly ever used in pyrotechnics?
Do they have problems with hydroscopicity or stability?
By employing a perchlorate of barium ( for green) or strontium (for red), we have an oxidiser, chlorine donor and colour agent all originating from a single compound.
I could easily make these compounds...... :D

#2 wjames

wjames

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 397 posts

Posted 14 November 2008 - 11:48 PM

i read something once about the space shuttle using strontium perchlorate for ptich and yaw control......injecting it in Aq format into the nozzle....

strontium perchlorate is used in flash powder, though i doubt anyone actaully uses the mix.....greenman lists it as TM1316 - 20 parts strontium perchlorate to 80 parts ( calcium/magnesium (75/25))

thats about the only thing i could find with a quick search.

Im sure there is someone on here with much more knowledge on those chemicals....

#3 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 14 November 2008 - 11:49 PM

Are the perchlorates of barium and strontium hardly ever used in pyrotechnics?
Do they have problems with hydroscopicity or stability?
By employing a perchlorate of barium ( for green) or strontium (for red), we have an oxidiser, chlorine donor and colour agent all originating from a single compound.
I could easily make these compounds...... :D


I believe that both of these are deliquescent. So if you leave it out in the open you will return to a puddle of the salt in solution.

They do have applications in specialist pyrotechnics, but would be generally impractical in normal use.

Edited by digger, 14 November 2008 - 11:52 PM.

Phew that was close.

#4 wjames

wjames

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 397 posts

Posted 15 November 2008 - 12:04 AM

incidently, out of pure interest......care to share how you would make these ?????

#5 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 15 November 2008 - 08:43 AM

incidently, out of pure interest......care to share how you would make these ?????


I am not sure about the solubility table for strontium perc, but barium perc is far more soluble than sodium, potassium or ammonium perc (think about 3 times, over 600g per 100g of water near boiling point) hence double decomposition is out of the question.

So that leaves a couple of options.

1) Use barium or strontium hydroxide with ammonium perchlorate then drive off the ammonia by boiling.
2) Use perchloric acid with the carbonate, but as you will know perchloric acid can be bloody dangerous stuff for all sorts of reasons.
Phew that was close.

#6 T-sec

T-sec

    Member

  • General Public Members
  • PipPip
  • 36 posts

Posted 15 November 2008 - 02:02 PM

Are n't they used in green and red flash salutes?

#7 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 15 November 2008 - 02:14 PM

Are n't they used in green and red flash salutes?


Well the formula posted above by WJames looks like a coloured salute formula.

I would assume that these are pretty specialist compositions requiring careful handling to keep them dry.

Have you seen the price of these chemicals off the shelf, ouch!
Phew that was close.

#8 Mortartube

Mortartube

    Pyro Forum Top Trump

  • General Public Members
  • PipPipPipPip
  • 1,082 posts

Posted 15 November 2008 - 02:35 PM

Out of interest. How much is Barium Perchlorate, as I have about 100g that I was given?
Organisation is a wonderful trait in others

#9 pyrotrev

pyrotrev

    Pyro Forum Top Trump

  • UKPS Members
  • 1,112 posts

Posted 17 November 2008 - 08:42 PM

Alkaline earth metal perchlorates are just about the most fiercely hygroscopic substances known - initially they were prepared for use as dessicants I believe. Some hang onto water so strongly that you can't remove all the water of crystallization by heating, it'll start to decompose first, which maybe explains why the anhydrous forms ain't exactly cheap. Also you need to be very careful when using them in the presence of alcohols and other organic solvents as they can produce some VERY dodgy reaction products.

Edited by pyrotrev, 17 November 2008 - 08:45 PM.

Trying to do something very beautiful but very dangerous very safely....

#10 Creepin_pyro

Creepin_pyro

    Pyro Forum Top Trump

  • General Public Members
  • PipPipPipPip
  • 1,198 posts

Posted 18 November 2008 - 11:24 AM

An interesting thread here:

http://www.apcforum....s...0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users