Jump to content


Photo

pulley sizes


  • Please log in to reply
2 replies to this topic

#1 defective

defective

    NO VICE :(

  • General Public Members
  • PipPip
  • 57 posts

Posted 27 April 2009 - 10:52 AM

can anyone help please?

i have a 1425 1/3hp motor , what size pullies do i need to reduce the speed to 70rpm?

i already have 6" and 3 1/2" pullies, what sort of rpm can i expect from these diameters?

the roller diameter is 1" and the jar is 7" to 7.5" in diameter.

thanks.

Edited by defective, 27 April 2009 - 11:35 AM.

" baarweep granaar veep ninibon "

#2 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,960 posts

Posted 27 April 2009 - 11:57 AM

can anyone help please?

i have a 1425 1/3hp motor , what size pullies do i need to reduce the speed to 70rpm?

i already have 6" and 3 1/2" pullies, what sort of rpm can i expect from these diameters?

the roller diameter is 1" and the jar is 7" to 7.5" in diameter.

thanks.


With the 3.5 on the motor the mill shaft will be 3.5/6 * 1425 = 831.25 rpm then the jar will be 1/7 * 831.25 = 118.75 rpm. Still a bit too fast I think.

So to get about 60rpm then go for a smaller pulley at 1.75".

There are obviously plenty of other size combinations that will work.

D
Phew that was close.

#3 defective

defective

    NO VICE :(

  • General Public Members
  • PipPip
  • 57 posts

Posted 27 April 2009 - 12:45 PM

With the 3.5 on the motor the mill shaft will be 3.5/6 * 1425 = 831.25 rpm then the jar will be 1/7 * 831.25 = 118.75 rpm. Still a bit too fast I think.

So to get about 60rpm then go for a smaller pulley at 1.75".

There are obviously plenty of other size combinations that will work.

D



awsome, so i.e a bigger jar a little slower again?

top man.
" baarweep granaar veep ninibon "




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users