Jump to content


Photo

24mm OD Rocket Tubes?


  • Please log in to reply
16 replies to this topic

#16 ElliotHC

ElliotHC

    Member

  • General Public Members
  • PipPip
  • 15 posts

Posted 13 December 2011 - 10:43 PM

Of course I'm doing all this outside.. I've been around the block a bit and have been dabbling in this hobby since the mid to late 80's when I was 12 and had a home office visit! :) obviously I've been a little more careful since then.

Edited by ElliotHC, 13 December 2011 - 10:46 PM.


#17 ElliotHC

ElliotHC

    Member

  • General Public Members
  • PipPip
  • 15 posts

Posted 14 December 2011 - 07:28 PM

I have found a nice chromed steel tube with an OD of 18.9mm, with shrinkage I'd say that's got to be good for an ID of 18.5mm.

I've cut a 1m roll of brown parcel paper in to motor lengths so that the motors are the right length to start with, do I just paint on PVA as I wrap it around?

Edited by ElliotHC, 14 December 2011 - 09:33 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users