Jump to content


Photo

V-pan mortars


  • Please log in to reply
9 replies to this topic

#1 Pyromax

Pyromax

    New Member

  • General Public Members
  • Pip
  • 1 posts

Posted 05 April 2015 - 10:47 PM

I happen to be the owner / manager of a business dealing in all aspects of fireworks, pyrotechnics, special effects and have been asked to provide the effects for a low budget ww1 / ww2 film.

I am looking into the possibility of getting some v-pans made up however i am unsure of the dimensions.

Any help would be much appreciated :-)

#2 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 06 April 2015 - 08:03 AM

I've messaged one member who has one or more who may help you. HOWEVER these are often scaled to fit into the project for which they are needed. The size you have seen may not be the size that you want to use. The shape does seem to have some effect on the shape of the debris plume but that doesn't stop others from using gas mortars and other items like woks and other cooking pans. You are of course going to do tests first to check your method and the safety distances you really need. Wars killed people films about war cannot!


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#3 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 07 April 2015 - 01:15 PM

What supplier sells made and tested and certified Fx pans? certified for what? IMO any that do haven't understood what they are making and what it will be used for. 100g BP loose or 100g gel explosive? once or a hundred times?


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#4 dave

dave

    Pyro Forum Regular

  • UKPS Members
  • 482 posts

Posted 07 April 2015 - 07:36 PM

some different types here, might be worth looking over

http://www.ame-pyrot...er_explode.html

 

 



#5 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 07 April 2015 - 08:49 PM

The pans I saw were about 15" square by about 9" deep in a four sided pyramid made from 6mm ish plate steel. I've also seen cooking woks used! Also short firework mortars ( I have some 10" long 6" DIA mortars that work with BP. I also have some gas powered cannons.)  


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#6 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 07 April 2015 - 10:19 PM

Given the right space and tools a mix of real explosion with some added air powered effect is probably best, just be very careful with gravel! any small stones move like bullets.


http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#7 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 07 April 2015 - 11:55 PM

Back on topic but if you determine the dimensions you require Id be more than happy to quote you for building them (and finalise the designs) as I was a coded welder back in the days!

#8 sfxdan3

sfxdan3

    Member

  • General Public Members
  • PipPip
  • 19 posts

Posted 11 May 2015 - 07:50 PM

Getting a welder or fabricator is the way to go. Motor pots are a great stock item that every sfx guy has. There's hundreds of designs out there. And they all have there benefits.

It's good to build up a collection, from 4" squared up to anything like 24".

Here's a few pointers when dealing with motar pots. (Sorry if this is teaching you to suck eggs)

Make sure the corners and bottom are reinforced. (I've seen lots of pots bulge out and crack due to no reinforcement)
Put handles on the sides, as pots are bloody heavy and a 2 man lift
It's handy to drill a 3mm in the base so twin flex can be passed through (or feed the line from the front and tie it of to the handle, as strung bounds and flex have a habit of flying out with the debris)
It's also a great idea to weld some half backs (scaffold fittings) to the side of the pot. That way it's easy to tube it off and help to stop any "bounce" when it goes off
When you place the pot, always put some sand bags down first, and surround the sides and top of the pot with the bags.

As far as guarantees go, the only thing you could do it get a coded welder to make them. But saying that, I know many very good welders who aren't coded. And also, many coded welders who are terrible.

#9 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 11 May 2015 - 07:55 PM

As far as guarantees go, the only thing you could do it get a coded welder to make them. But saying that, I know many very good welders who aren't coded. And also, many coded welders who are terrible. 

 

Amen to that! Im gobsmacked sometimes by the "professional" welds I've seen that look like bird poo!



#10 sfxdan3

sfxdan3

    Member

  • General Public Members
  • PipPip
  • 19 posts

Posted 11 May 2015 - 08:13 PM

It's amazing what a grinder and a bit of bull sh*t black paint can do




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users