Jump to content


Photo

BPS Providing Home For Amateur Firework Makers


  • Please log in to reply
182 replies to this topic

#121 sizzle

sizzle

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 600 posts

Posted 20 June 2006 - 09:33 PM

is the bps still accepting new members?, i have filled in the online form a couple of times but heard nothing


I believe the UKPS is still accepting requests for membership packs, but as they are only sent out every so often it may take a bit before you recieve your pack.
Category 4 Trained to BPA Level 1 Equivalent.

#122 adamw

adamw

    An old Leodensian

  • General Public Members
  • PipPipPipPip
  • 1,297 posts

Posted 20 June 2006 - 09:35 PM

The Society (now known as the UKPS) is accepting registrations, yes. Please PM me with your address so I can check that a pack has been sent out. As of a couple of weeks ago, all requests have been processed and sent out.
75 : 15: 10... Enough said!

#123 Sparks

Sparks

    Sparks

  • General Public Members
  • Pip
  • 8 posts

Posted 29 June 2006 - 04:54 PM

So, what's happening with regard to the proposed club, then? :D

I've just skimmed through this entire thread and would like to express my interest too. I'm in Norfolk, by the way.

#124 adamw

adamw

    An old Leodensian

  • General Public Members
  • PipPipPipPip
  • 1,297 posts

Posted 29 June 2006 - 09:12 PM

http://www.pyrosociety.org.uk/

Request an application pack.
75 : 15: 10... Enough said!

#125 Sparks

Sparks

    Sparks

  • General Public Members
  • Pip
  • 8 posts

Posted 30 June 2006 - 12:35 PM

http://www.pyrosociety.org.uk/

Request an application pack.



Just did so today, thanks :) I hadn't realised that UKPS was the upshot of all the discussion on here. Good-ho!

Edited by Sparks, 30 June 2006 - 12:35 PM.


#126 FIZCRACLE

FIZCRACLE

    FIZCRACLE

  • UKPS Members
  • 20 posts

Posted 28 January 2007 - 02:57 PM

I have talked this morning with the HSE regarding the possibility of an amateur club for firework builder. They where very helpful and kind and will send me relevant information regarding the subject. Yes, I gave them my home address. They are real people that distinguish between B**mbs and firework and are willing to explain the required regulation.

A manufacturing license in this country cost about 600?, requires a minimal facility for storage and separate building for actual construction, and an area to do it on. There are also other costs such as insurance, council permit and so on ? but if 50 of us want to create such a club, I see it within our financial capabilities to start organising and becoming legal. The license is indefinite as long as there is no change in circumstances.

Even better if one of the member lives in a farm and does not mind allocating some area for the purpose.

Any comments?

BigG



#127 FIZCRACLE

FIZCRACLE

    FIZCRACLE

  • UKPS Members
  • 20 posts

Posted 28 January 2007 - 03:44 PM

Hi there BIG G I am very new to your forum , and at the rist of sounding NIEVE I belive in principal this sounds just the ticket,!!!

At least the powers that be ( the home office ) can see that people want to be recognised to be doing the right thing ie, seeking legitimacy. in our interests / hobby/ passion. and would give them an idea as to where we are ? and our intentions. what do you think .?

I belive that if people are open about their intentions etc ,this should defuse the situation as regards worrying about the knock on the door etc ! !

As I see it the biggest problem is abuse of imformation , ie nutters that want to cause harm to others b-o-o-m !!!!
I think unfortunataly what ever you do to stop these fanatics thay will always find a way to get there way .

why should the minority stop the freedom of others IE Pyrotecnitions, not sure about that word but you get the jist.?

After all whots the point of having a democracy if it fails because of paranoia ?

getting back to the essence of your thred / Email I for one would certainly support this Club / this could be the start of something very good, kind regards FIZZY.

#128 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 07 June 2007 - 10:38 PM

Now then chaps, as you know I am new to the forum. I will be paying up my subs shortly to become a "proper" member.

So has any progress been made towards finding a home for construction/testing. The reason I ask is I tested a composition in my star gun tonight and although it was safe, instead of firing with a bit of a bump there was a big F@@k off floor shaking and window rattling bang which I am certain has probably annoyed the neighbors (along with bending the base of my star gun).

Hence one very very high rate GF threatening to pour all my chemicals down the drain, so the sooner I can find a better place for mixing/testing the better.

So is there any new news yet on a home or homes for the UKPS?

Edited by digger, 07 June 2007 - 10:41 PM.

Phew that was close.

#129 maxman

maxman

    Pyro Forum Regular

  • UKPS Members
  • 705 posts

Posted 08 June 2007 - 08:24 AM

What size stars? and how much BP?

#130 digger

digger

    Pyro Forum Top Trump!

  • UKPS Members
  • 1,961 posts

Posted 08 June 2007 - 09:32 AM

What size stars? and how much BP?


too much bp, around 4 grams and a 20mm star, which I think was overly tight in the tube as there was no evidence of it exiting, also I think my star may have been a little on the fast burning side (bp based star) which may have broken down and exploded in the tube. I have learn't a lesson, but I think I will have to find somewhere else for testing.
Phew that was close.

#131 Richard H

Richard H

    Pyro Forum Veteran

  • Admin
  • 2,706 posts

Posted 08 June 2007 - 09:58 AM

Funnily enough we are on the verge of making an important announcement about this. I have been busy with the vice-chair Adam, and the upshot is, we expect to announce that licensed workshops for use by the membership will be available shortly.

#132 Rip Rap

Rip Rap

    Pyro Forum Regular

  • UKPS Members
  • 331 posts

Posted 08 June 2007 - 10:30 AM

Funnily enough we are on the verge of making an important announcement about this. I have been busy with the vice-chair Adam, and the upshot is, we expect to announce that licensed workshops for use by the membership will be available shortly.


I am awestruck! This is amazing. How did you manage the legalities? Sorry, you probably have a thousand other questions to be answered about this - I will wait until the full announcement.

All I can say is bloody brilliant work - well done!! :D
"Choose a job that you love & you will never do a days work in your life!"

#133 Richard H

Richard H

    Pyro Forum Veteran

  • Admin
  • 2,706 posts

Posted 08 June 2007 - 10:45 AM

I can't go into details yet, but the crux of the matter is that there are some unused workshops at a licensed manufacturing facility in the East Midlands. The owner is keen for us to renovate these, and it is entirely possible that members would be able to make use of them once a suitable framework is established. The site itself has had a long history of explosives manufacture and the specific building(s) in question are purpose built.

#134 MMMMMM Pyro

MMMMMM Pyro

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 209 posts

Posted 08 June 2007 - 03:26 PM

I am absolutely amazed! This is amazing! Granted I wont be able to get up there, but still! Congratulations!

Regards,

Mike

#135 minalth

minalth

    Member

  • General Public Members
  • PipPip
  • 53 posts

Posted 10 June 2007 - 09:27 PM

<awestruck>
...



...


no words come to me
If you must argue, remember that it is impossible to defeat an ignorant man in argument.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users