Jump to content


Photo

ramming kc104


  • Please log in to reply
3 replies to this topic

#1 jeffrocket55

jeffrocket55

    Member

  • General Public Members
  • PipPip
  • 11 posts

Posted 12 March 2009 - 06:36 AM

Is it dangerous to ram a comp if it has kc104 like kc104/sulfur/charcoal.Using it as a propellant I got high altitude flights of 600 meters.Better than nitrate the perch was substituted

#2 a_bab

a_bab

    Member

  • General Public Members
  • PipPip
  • 170 posts

Posted 12 March 2009 - 06:45 AM

I wouldn't ram it, you should always remember that while KClO4 is less sensitive that KClO3 it's still much more so than KNO3.

Besides, even while ramming BP accidents happen.

#3 seymour

seymour

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 691 posts

Posted 12 March 2009 - 09:08 AM

Firstly, it is not advisable to ram Perchlrate compositions at all.

Secondly, while Perchlorates may not have quite as serious issues with Sulfur as Chlorate, that does not mean a huge lot. there is no risk of spontanious ignition, like there is with Chlorate/Sulfur, but in terms of the extreme sensitivity of the mix, Perchlorate is a very close second. Take out a pinch of K perc and place it on a concrete surface, add a pinch of Sulfur and give it a whack with a hammer.

Even with pressing I would be uncomfortable with the addition of sulfur. I imagine the mix stuck between the tube and ramming rod, and the friction grinding it...

Sulfur allows nitrates to liberate more oxygen upon decomposition, but the same is not true of perchlorates. If your doing a rocket fuel with KP, I'd leave out the sulfur.
The monkey leaped off it's sunny perch and flew off into the night sky.

#4 MDH

MDH

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 742 posts

Posted 12 March 2009 - 11:15 AM

Is it dangerous to ram a comp if it has kc104 like kc104/sulfur/charcoal.Using it as a propellant I got high altitude flights of 600 meters.Better than nitrate the perch was substituted


You should probably press it instead. KCLO4 and Sulfur are very sensitive together.

Edited by MDH, 12 March 2009 - 11:16 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users