Jump to content


Photo

Is there an easy way to make E-matches?


  • Please log in to reply
36 replies to this topic

#1 Green_as_my_powder

Green_as_my_powder

    Member

  • General Public Members
  • PipPip
  • 51 posts

Posted 30 April 2009 - 08:15 PM

Fellow pyros,

I've got (I think) all the supplies, but the nichrome wire is so thin that it is very hard to work with. Any tricks to getting wires attached to the nichrome? The wire I have is 48 guage... like thin hair.

Thanks for any info!
And the priest shall take from the cereal offering its memorial portion and burn this on the altar, an offering by fire, a pleasing odor to the LORD.
(Lev 2:9)

--seems to me that if God likes the odor of burnt cereal, He's just gotta love gunpowder...

#2 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 30 April 2009 - 08:30 PM

In the USA there are ematch kits containing pyrogen dipping mixtures. Also ODA sell prewired chips of PC board with the bridge wire in place and all you have to do is add scab wire and pyrogen.

Only bakers fluid active flux is suitable for soldering nichrome.

Edited by Arthur Brown, 30 April 2009 - 08:31 PM.

http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#3 Sambo

Sambo

    Member

  • General Public Members
  • PipPip
  • 96 posts

Posted 30 April 2009 - 08:55 PM

I've got some of the ematch heads from ODA, they are ready tinned so are easy to solder shooting wire too. I haven't got the pyrogen dipping rite yet though, they pop and don’t catch fire, I think the coating is too thick.

Cooperman's way is easy and reliable, i can't find the link atm can someone add one if its still available?

Edited by Sambo, 30 April 2009 - 08:59 PM.

Currently firing for Pendragon Fireworks

#4 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 30 April 2009 - 10:50 PM

http://www.freewebs....an435/index.htm

Link to my old site. Ematches are on there so dont follow the link to the new website but go to Projects then Pyro build Projects and then Ematches.

#5 mike_au

mike_au

    Member

  • General Public Members
  • PipPip
  • 54 posts

Posted 01 May 2009 - 01:06 AM

Get yourself a wire wrapping tool and a good pair of wire strippers and then use Cooperman's method. (I hate twisting the nichrome by hand, too fiddly and I'm always stabbing myself)

#6 cooperman435

cooperman435

    UKPS Caretaker & Bottlewasher

  • Admin
  • 1,911 posts

Posted 01 May 2009 - 08:14 AM

Good wire strippers yes but the wire wrapping tool I found much harder than the method on the website. As the nichrome is so thin and still springy AND because you really need to thread it between the two wire to start off with its loads easier by hand.

Dont forget that your not actually twisting the nichrome round the wires but twisting the wires and holding the nichrome stationary.

Theres a video to watch too of the whole process. 30 seconds long.

#7 mike_au

mike_au

    Member

  • General Public Members
  • PipPip
  • 54 posts

Posted 01 May 2009 - 08:53 AM

OK, I just looked at the pictures and assumed you were doing the same as me but it sounds like you have a better way, I'll check out the video when I get home.

#8 phildunford

phildunford

    Member

  • General Public Members
  • PipPipPipPipPip
  • 2,299 posts

Posted 01 May 2009 - 09:36 AM

I must be doing something wrong, because I have some of the ODA chips (the ones with the thinner wire) and there is no way I can get them to ignite even the most sensitive pyrogen.

Coopermans method works fine - the only possible downside that has been mentioned is that because the wire is wrapped and not soldered it's possible corrosion could set in in storage - only time will tell on this one.
Teaching moft plainly, and withall moft exactly, the composing of all manner of fire-works for tryumph and recreation (John Bate 1635)
Posted Imagethegreenman

#9 BrightStar

BrightStar

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 900 posts

Posted 01 May 2009 - 10:05 AM

I must be doing something wrong, because I have some of the ODA chips (the ones with the thinner wire) and there is no way I can get them to ignite even the most sensitive pyrogen.


There are a couple of tricks with the #50 gauge ODA chips. You do indeed need a very sensitive pyrogen. I use 50/50 potassium chlorate and antimony trisulfide. The ingredients must pass 200-mesh and should be mixed wet in ping-pong laquer. The camphor plasticister in the ping-pong celluloid tends to help the matches burn rather than shatter.

Once you have this primer layer in place, it's easy to coat over with BP/NC or H4/NC and then a clear layer of laquer. With the correct recipe, you can have 100% success with these chips. They're compatible with commercial matches (ie 1.5 ohms, 0.5A current) and will fire from a single AAA cell. I've stored a few for over a year and they still seem reliable.

Edited by BrightStar, 01 May 2009 - 12:29 PM.


#10 phildunford

phildunford

    Member

  • General Public Members
  • PipPipPipPipPip
  • 2,299 posts

Posted 01 May 2009 - 11:22 AM

Thanks Brightstar. I will try as you describe.

I think the problem could be that my chemicals are not fine enough. Otherwise, I'm pretty much following your method.

I did buy the 50g version for the very reason that they would be equivalent to commercial ematches. If I can get them going, they will work out at about 8p each, which is pretty good. Otherwise I have 1000 very small white elephants!
Teaching moft plainly, and withall moft exactly, the composing of all manner of fire-works for tryumph and recreation (John Bate 1635)
Posted Imagethegreenman

#11 Arthur Brown

Arthur Brown

    General member

  • UKPS Members
  • 2,923 posts

Posted 01 May 2009 - 06:20 PM

There is one commercial method of manufacture that crimps the copper over the nichrome.
http://www.movember.com/uk/home/

Keep mannequins and watermelons away from fireworks..they always get hurt..

#12 phildunford

phildunford

    Member

  • General Public Members
  • PipPipPipPipPip
  • 2,299 posts

Posted 02 May 2009 - 05:14 PM

Thank you Brightstar (stands back in respectful reverence). It works!

Seems entirely down (as you said) to the fineness of the grind. Put both chems in my mill for a couple of hours (NOT together for those new to this) bound with my usual NC and three out of three successes - as opposed to 0 out of 30 previously.

Will now do a bit larger trial to test relibility, no fire currecnt etc...

Many thanks.
Teaching moft plainly, and withall moft exactly, the composing of all manner of fire-works for tryumph and recreation (John Bate 1635)
Posted Imagethegreenman

#13 BrightStar

BrightStar

    Pyro Forum Regular

  • General Public Members
  • PipPipPip
  • 900 posts

Posted 02 May 2009 - 05:43 PM

It works!


Damn it... I was hoping to take some of those 'little white elephants' off you at a discount B)

Given the excuse, I popped some of my original matches - 2 1/2 years old stored with silica gel. No problems at all - a healthy crack and jet of sparks from each one. These were chlorate primer/NC + BP/NC + clear laquer.

Now we just have to make some protective covers. Any ideas?

#14 Richard H

Richard H

    Pyro Forum Veteran

  • Admin
  • 2,706 posts

Posted 02 May 2009 - 05:47 PM

Heat shrink tubing perhaps?

#15 pyrotrev

pyrotrev

    Pyro Forum Top Trump

  • UKPS Members
  • 1,112 posts

Posted 04 May 2009 - 12:51 PM

4mm ID nylon pneumatic tubing is good, nice and tough. Alternatively, Moss Plastic Parts probably make a suitable widget.
Trying to do something very beautiful but very dangerous very safely....




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users